Valmar Airflow 5500 Pull Type Fertilizer Spreader

valmar fertilizer spreader

Valmar Airflow 5500 Pull Type Fertilizer Spreader

HOPPER

  • 170 cu. ft.
  • 1 piece, 409 stainless steel construction with 2 component epoxy primer and 2 component cross linked acrylic top coat paint system
  • Hopper bottom shut-off slide panels
  • Roll tarp installed

BOOMS

  • Available in 40 ft. or 36 ft. spread
  • 304 stainless steel construction
  • Break away boom tips
  • 2.5 in. diameter tubes
  • 6 deflectors per side
  • Manual fold
  • Self leveling

METERING SYSTEM

  • 304 stainless metering bottoms with 6 outlets per side
  • 304 stainless steel, self cleaning metering rollers
  • Manual half width shut-off on either side
  • Rates up to 500 lb./acre at 5 MPH down to 5 lb./acre with optional small seed and herbicide kit
  • Ground drive
    • Hydraulically engaged
    • 60 speed gearbox with 5% between settings
  • Hydraulic metering drive options
    • A basic drive supplied with hydraulic motor only for completion by customer with system of their choice – does not include radar, servo valve, encoders, controller/monitor, cables etc.
    • A Rawson AccuRate® Drive complete with hydraulic lines that is compatible with many of today’s GPS systems
    • A complete Raven System such as Viper Pro®, Envizio Pro® or SCS 660®

FAN

  • 20 in. impeller
  • 2-5 in. fan outlets
  • PTO fan drive
    • 1000 RPM CV driveline, 13⁄8 in. – 21T spline
    • 19:4.12 pulley drive ratio
    • 4 band belt with spring loaded idler tensioner
  • Optional hydraulic fan drive
    • 32 CC motor requires 23 GPM operating at 1885 PSI
    • 3/4 in. hydraulic lines
    • 3/4 in. couplers recommended
    • 30 in. water column manifold pressure
    • Case drain required
    • 6.9:4.12 pulley drive ratio

HYDRAULICS

  • Requires 1 remote to engage metering system
  • Requires 2nd remote for optional hydraulic boom fold
  • Requires additional remotes for optional hydraulic drives for fan and/or metering

CHASSIS

  • Tandem walking beam
    • Adjustable axle width with available tires: 16.5L x 16.1 (81-99 in.) or 9.00 x 20 (72-90 in.)
    • 2.5 in. axles with 6 bolt hubs
  • Single axle
    • 550/60-22.5 tires/12 ply at 90 in. center to center
    • Tire Dimensions – width 550 mm (21.7 in.)/OD – 1238 mm (48.7 in.)
    • 2.75 in. axles with 8 bolt hubs

OPTIONS

  • Herbicide kit includes 1 set of 28 groove metering rollers and fan intake reducer for metering finer products and lower rates
  • Foam or disc marking systems
  • Extension kit to extend 36 ft. boom to a 38 ft. spread
  • Hydraulic boom fold
  • Hopper screen assembly

Start typing and press Enter to search